Eltouny Elevators Company complete lifts

Eltouny Complete Lifts

CE Marking

Eltouny Complete Elevators, The lifting systems with machine room, machine roomless, and Nano lift have acquired the CE mark certification. Eltouny complete lifts are manufactured according to the European standards with all the essential requirements to meet high safety, health, and environmental protection specification for our clients. Our Elevators comply with all the legal requirements for CE marking and can be sold throughout the European Economic Area (EEA) and the European Union (EU) without restrictions.


EOS
License Of Quality From The Ministry Of Industry and Foreign Trade

Eltouny Elevators Company acquired the license of Quality Mark on our complete elevators components, doors, car frames, and handles from the Egyptian organization for standardization and quality from the Ministry of Industry and Foreign Trade.

Eltouny Elevators Factory
Eltouny Elevators Company CE Mark Certification
Eltouny Elevators Company CE Mark Certification
Eltouny Elevators Company CE Mark Certification

MR Elevators

Two Speed or VVVF Lifting System With Machine Room
  • This system is comply with the Egyptian Standards and the European CE Mark Standards.
  • MR Series is the classic elevator system with a machine room that is usually located on a rooftop of a building. This system in still widely used in Egypt and The Middle East. This system has the widest variety on speed options and load capacity.
Lift Load Capacity 175 kg 275 kg 320 kg 450 kg 630 kg 800 kg 1000 kg
Person 2 3 4 6 8 10 13

Suspension 1:1
Speed 0.8 m/s – 1.6 m/s
Max. Travel 36 Meters
Max. Stop 12 Stops
Min. Shaft Pit 1100 mm
Min. Headroom 3000 mm
Machine Position Machine Room

Technical details and user guides are submitted upon delivery.

The values in this chart are indicated according to each product type certification.


Machine Roomless Elevators

Room-less Solutions With Gearless Machines
  • This system is comply with the Egyptian Standards and the European CE Mark Standards.
  • MRL is designed initially for buildings between 2 and 8 stories, this system employs a smaller sheave than geared elevators. The reduced sheave size, together with a redesigned motor, allows the machine to be mounted within the hoistway itself eliminating the need for a bulky machine room on the rooftop.
Lift Load Capacity 175 kg 275 kg 320 kg 450 kg 630 kg 800 kg 1000 kg
Person 2 3 4 6 8 10 13

Suspension 2:1
Speed 0.63 m/s – 1.6 m/s
Max. Travel 36 Meters
Max. Stop 12 Stops
Min. Shaft Pit 600 mm
Min. Headroom 3000 mm
Machine Position Inside Shaft
Car Frame Inversed L Frame

Technical details and user guides are submitted upon delivery.

The values in this chart are indicated according to each product type certification.


Hydraulic Elevators

  • Hydraulic elevators are used extensively in buildings up to five or six stories high. These elevators which can operate at speeds from 30 - 50 centimeters per second. It does not use the large overhead hoisting machinery. With the hydraulic type driving system, the hydraulic power unit forces oil into the hydraulic jack (a combined plunger and cylinder) and the plunger pushes the car upwards using energy stored in the oil under pressure. The car descends automatically as the oil returns to the cylinder along the same route.
Lift Load Capacity 320 kg 450 kg 630 kg 800 kg 1000 kg
Person 4 6 8 10 13
Speed 0.2 - 0.52 m/s 0.52 m/s 0.42 m/s 0.42 m/s 0.42 m/s

Suspension 2:1
Max. Travel 21 Meters
Max. Stop 8 Stops
Min. Shaft Pit 600 mm
Min. Headroom 3000 mm
Machine Position Outside Shaft
Car Frame Inversed L Frame

Technical details and user guides are submitted upon delivery.